LED Fixture

3Watt Inground Led Fixture.

Occupancy Sensor

Item Code: ECR385
We are an ace manufacturer, trader and supplier of Occupancy Sensor and have marked our name very strongly in the market at present. This one from our end is a lighting control device that detects occupancy of a space by people and turns the lights on or off automatically, using infrared, ultrasonic or microwave technology. These products from our side are typically used to save energy, provide automatic control, and comply with building codes. These are made available at extremely affordable rates and as per the set industry norms and guidelines.

Features:

  • Heat movement detection
  • Checks for reflected pattern
  • Sends high frequency waves

Specifications:

Technical Specification

Operating Voltage & Frequency

220V ~ 240V 50Hz

Working Temperature

0Æ’ ~ 50Æ’

Ambient Temperature

-20Æ’ ~ 70Æ’

EFT

2000V/A

Surge

2000V/A

Compliance Standard

CE, ROHS

Lux (adjustable)

2~1000

Time (adjustable)

10 sec ~ 20 min

Detection Range & Angle

Range: 12M radius at 3M height

R-385:360 degree (3PIRs)

Warm Up Time

30 sec.

Mode

Auto mode, Test mode, Short Time Pulse(On 1 Sec, Off 9 sec)

Terminal and connector

4 PIN terminal: N x 2, L x 1, L€™ x 1

Snap-on system

Sensor head, power box

IP rating

IP30

Material (housing)

ABS PC

Colour

White

Accessory

Surface mount box

Dimension

90mm x 90mm x 40mm(W x L x H)


Microwave Sensor

Item Code: ECDP05M
We are recognized as a successful manufacturers, traders, exporters and suppliers of Microwave Sensors in the market at the present scenario. These sensors send high frequency microwaves in an area and check for their reflected patterns. If the reflected pattern is changing continuously then it assumes that there is occupancy and the lighting load connected is turned on. If the reflected pattern is the same for a preset time then the sensor assumes there is no occupancy and the load is switched off. A microwave sensor has high sensitivity as well as detection range compared to other types of sensors.

Features:

  • High sensitivity
  • High detection range
  • Accurate sensor capability

1Watt Up- Down fixture

It creates mood light effect, made from solid alluminium with 2 nos. Of 1 watt power led up & down which is mounted in the middle of the wall for indoor as well as outdoor. It is used mainly in bed room, passage and also in the outdoor application. Its very slim in look that replaces the bulky traditional fixture.

Pir Motion Sensor Light

Item Code: ECR374
Our company is recognized as a successful manufacturers, traders and suppliers of Pir Motion Sensor Light in the market at the present scenario. These lights have the capability to calm fears when it automatically lights up a dark garage, a dark sidewalk or even a dark area of the yard. Whether a person is coming home at night, have to navigate a dark, icy sidewalk or wonder about strange noises in the back yard, these will ensure to be safer when any nearby motion activates the outdoor lights and they switch on. Motion detector lighting is inexpensive and easy to install.

Features:

  • Auto detection of motion
  • Ease of installation
  • Automated mechanism

Specifications:

R-374 ceiling surface light motion detector

 

Operating voltage & frequency

220V 240V 50Hz

Working temperature

-10℃ 40℃

Storage temperature

-20℃ 70℃

Compliance standard

CE, ROHS

Rated load

834-1A-B-C 10A/277VAC TV-5

1000W Incandescent

500W Fluorescent

500W Energy saving bulb

Lux adjustment

5~2000, Max= Test mode

Time adjustment(Precise digital adjustment)

Time: 3sec, 15sec, 1min, 5min, 10min, 20min, 30min, MIN=

Detection range & angle

Range: 7 8M diameter in 2.5M height at 20℃

Angle: 360 degree

Warm up time

60 sec.

Mode

Auto mode, Test mode, Short Time Pulse (On 1 Sec, Off 9 sec)

Terminal

4 x 4.0mm²: N x 2, L x 1, L’ x 1

Accessory(Option)

IR remote control

IP rating

IP 20

Material

PC

Color

White

Dimension

120mm, 23mm thick,(lens 37mm)

Electricals Photocells

Item Code: ECLS05
We have established ourselves as leading manufacturers, traders, exporters, importers and suppliers of Electricals Photocells in the market. It is a light-controlled variable resistor. The resistance of the same decreases with increasing incident light intensity; in other words, it exhibits photoconductivity. These can be applied in light-sensitive detector circuits, and light- and dark-activated switching circuits. This product is made of a high resistance semiconductor. In the dark, it can have a resistance as high as several mega ohms, while in the light, it can have a resistance as low as a few hundred ohms.

Features:

  • Light-controlled
  • High resistance semiconductor
  • Variable resistance

Specifications:

  • Power Source: 220V or 240V/Ac Power Frequency: 50Hz, Rated Current: 6A , Ambient Light: <3-200 Lux (Adjustable) Timer Setting Range: From 1 Hour To 9 Hours (Max. 9 Hours), Adjustable Or Run Duck To Dawn Only , Working Temperature: -20~ 40Æ’, Working Humidity: <93%Rh
  • Lux Adjustable: Turn To Moon Position With Anticlockwise, It Means The Photocell Will Only Work In The Dark(Less Than 3Lux). If Slowly Turn To Sun Position With Clockwise, It Will Change The Lux Value From Dark To Dawn, And Working In Dawn Only.
  • Timer Setting: This Photocell Has Regular Light-Controlled Function (Light Is Turned On In The Night, And Turned Off In The Daylight) And Timer Function, It Means That You Can Set Time You Want The Photocell Works With A Stated Lux Value.

Daylight Lux Sensor

Item Code: D22

Daylight Lux Sensor:-

 

This Light Sensitive Timer has a controller which will automatically turn the lights of other connected devices on at dusk and off at day break. It has a time delay circuit so that it is not affected by a sudden or brief change in light level caused by intermittent cloud cover, reflections, vehicular light or lightning. It is ideally suitable for the control of lights at the front door, garden, garage, etc

 

EC D-22 Twilight Switch With Ambient Light Level Memorized Featu

Operating Voltage & Frequency

220V ~ 240V 50Hz

Working Temperature

-20Æ’ ~ 50Æ’

Storage Temperature

-20Æ’ ~ 70Æ’

Compliance Standard

CE, ROHS

Rated Load

10A/277VAC TV-5

Lux adjustable

3~1000

Time adjustment

1) Dusk to Dawn(D-D).

2)2,4,6,8 hours delay time after dusk

Switching delay time

20 sec

Push button

To memorize the ambient light level

Terminal block

4 x 4mm²

Earth x 1

N x 1

L x 1

L€™ x 1

IP rating

IP55

Protection

Class II

Material (housing)

PC

Colour

White

Dimension

105mm x 79mm x 36mm(HxWxD)

Status

Mass production

 

 

 

 

 

 

 

3 Watt LED Spot Light (1 x 3)

We offer 3 Watt LED Spot Light (1 x 3) that highlights the area and create a different viewing angle. Our beautifully designed lightning solutions are highly durable, reliable and ensures excellent performance. Easy to install, these are rust proof, unbreakable and consumes less power. The quality checks includes uniformity in light check, load performance check etc. Our innovative lightning solutions used in varied applications includes stairway accent lightning, cove lightning, club and bar lightning, architectural decorative lightning and many more. These are also custom designed as required by the client.

The range is available in colors:

  • White
  • Blue
  • Green
  • Red
  • Amber

Drive Way LED Fixture

The drive way 2 sides Led spot fixture is a custom designed product made from solid Alluminium having 2 nos. of IP-67 grade inbuilt 1 Watt power LED spot to be mounted in the middle of the road that creates a very dramatic view from a distant place.

RGB Fascade Light

It's a fascade light made with higher lumens power led in a IP-67 grade alluminium housing in a desired custom design shape which is used to highlight the exterior part of the building, 5 star hotels or any sculpture placed in outdoor location.

LED Ceiling Light

We offer a wide range of ceiling lights that includes 1 Watt Ceiling Mounted. These lights can be easily screwed to the ceiling, which impart altogether different looks to the surroundings. Highly durable and reliable, our range is shock, vibration and water resistant, consumes less power and ensures excellent performance. Owing to excellent quality features, our range find application in auditorium walkway lighting, accent lighting, concealed lighting and many more. We test our range on uniformity in light, load performance and LED mounting. Custom designed solutions are also provided as required by the client.

The range is available in colors:

  • White
  • Blue
  • Green
  • Red Amber

9 Watt LED Spot Light (1 x 9)

We offer 9 Watt LED Spot Light (1 x 9) that dazzles the area and lends it an enchanting aura. These lights highlight the area with different viewing angle. Available in various specifications, the range ensures excellent performance and allows low power consumption. We perform quality checks on the lights, which includes uniformity in lights, soldering check and load performance check. These lights find there application in various areas including advertisement signs, emergency and security lightning, back lightning for sign age letters and many more. Available in single and multi-color, our range is custom designed as required by the client.

6 Watt LED Spot Light (1 x 6)

We offer 6Watt Led spot(1 x 6) that illuminates the area and creates the mesmerizing look. Our range of lightning solutions are durable and reliable and also water, rust, shock resistant. These are easy to install, low power consuming and ensures excellent performance. The new and innovative designs are used in contour lightning, cove lightning, auditorium walkway lightning and many more. These are also custom designed as required by the client.

The range is available in colors:


  • White
  • Blue
  • Green
  • Red
  • Amber